Dennis Bassboss
Member
You are very much welcome Andrew!!!
Sweetwinhunter said:25: 12, 2 of 6
24: 11, 0 of 6
23: 11, 1 of 6
22: 16, 3 of 6
21: 17, 1 of 6
20: 11, 2 of 6
19: 11, 1 of 6
18: 11, 1 of 6
17: 11, 4 of 6
16: 13, 0 of 6
15: 10, 1 of 6
14: 17, 1 of 6
13: 13, 0 of 6
12: 13, 1 of 6
11: 16, 2 of 6
10: 13, 1 of 6
9: 15, 2 of 6
8: 14, 0 of 6
7: 10, 0 of 6
6: 11, 2 of 6
5: 11, 1 of 6
4: 12, 0 of 6
3: 16, 6 of 6 ***
2: 17, 3 of 6
1: 15, 3 of 6
*GRIN*
Andrew
Beaker is right here.... after everything gets working weighted announcers will be the next step ...Beaker said:Sweet
Wait 'til you see double and triple
Now, we have to think about weighted announcers
I have put mine at weight 1...and multiweight 2...But I'm at high include add....maybe exclude would be better here tough...Have to try them I guessBrad said:Can someone pls give a hint to the initial settings for the Announcer filter/processor? Would like to try BC49 but keep shooting blanks here.
I have the selector at Hi, Incl, Add , processor at Wt 1, Mult 1 . Am having problems with the Filter settings
There are a few settings there and I left some at what they were Bypass 0, I set it at 0...if you don't it will not take the last draw in account having the 49 numbers...Brad said:OK thanks, how did you set the Filter, Bypass 0, Use ?
I'm clear on that part, also tried a wide range of Draws to Use, still nothing ...Dennis Bassboss said:... <snip> ... Bypass 0, I set it at 0...if you don't it will not take the last draw in account having the 49 numbers...
I haven't used that so far, usually it's left at default. Some of the AI stacks I generated in the past made use of it. This is what Andrew posted in relation to the Announcer processor:Dennis Bassboss said:What bothers me is cycle start offset???
Dennis Bassboss said:What bothers me is cycle start offset???
Brad said:Can someone pls give a hint to the initial settings for the Announcer filter/processor? Would like to try BC49 but keep shooting blanks here.
I have the selector at Hi, Incl, Add , processor at Wt 1, Mult 1 . Am having problems with the Filter settings
Excellent ..Now I understand it well...Thanks to Brad and Andrew!winhunter said:Ok, lemme explain the cycle start offset...
You see how the cycler options are grouped together?
The cycler is basically a simple way to set when the filter is ON, and when it is OFF. It cycle's On/Off based upon the on/off values. The offset tells WINHunter when to start the cycler, from the FIRST draw in the history (not the most recent, the cycler has a start point at the beginning of the history, not the end.)
The offset I mentioned for the announcers has not been implemented yet. I am seriously thinking about removing the cycler settings from the filter altogether, and putting them into a trigger (makes more sense there.)
Andrew
had almost identical settings to yours ... optimized (or tried to) likewise ... lost my hair in one night ... now I know that spelling was the culprit?winhunter said:Ok, here is what I did for my first round of trials with this single processor .... snip ... Andrew