Master Lottery Software

B

black prince

Member
Springbok

Ooops, you should use combine5 to create the full wheel not lexico5. If you are playing the 6/49 game then you will need a fast processor with 2 to 3 Gigs of memory and lots of patience.
Click to expand...

And you will need over 400,000 drawings in your D5 files.
Click to expand...

The program I used is Combinations.exe. TreasureHunt is 5/30 and
all combinations are only 142,605. I switched to Cash5 which is 5/43 and
all combinations are 962,598 which is plenty. It also is a daily lottery with
bigger prizes, but has only 3 months of history.

Take the numbers from the last draw and add another 10 0r 12 numbers. Do not use the rest of the numbers. Create a full wheel with those 15 or 17 numbers. Make a note of the number of combinations. Run lexico5 with inner filters enabled and see how many combos are generated. Normally it will knock out 30% of the full wheel. Experiment to see the effects of the filters.
Click to expand...

I have a set of numbers forcasted from 'Winnalotto' which is 15 numbers and
i'm not sure why adding the last winning draw's numbers will do. I did get
lexico5 to run against (History+D5) file and enabled inner filters. But there
were so many settings being prompted for, I just kept hitting enter since I
had no idea what to enter.

-BP
 
S

Springbok

Member
Helllo Black Price

I quickly set up a D5 file for the UK 5/34 section of the Thunderball. Now the full wheel is around 285,000. So I generated another 150,000 with Util5 to make up the required 400,000 +. The I added the real draws. I ran report5. I noticed that in layer4 the md4 filter for Ion2 occasionally reached 112,00.So i decided to set it at that level-that is Min 112,000 and enabled inner filters. I ran lexico5 to see what would happen. It outputted around 11,000 combos and stopped. This means it is capable of reducing around 280.000 combos to that level.
 
E

Excellence

Member
Hi BP

black prince said:
but this time the range of current draw to ending draw is
determined by using FFG which in my case is 26 prior draws.
Click to expand...


This range varies if u analyse pairs or trips? And if so what is the DC that you are using?
 
B

black prince

Member
To Excellence and Springbok


Originated from Excellence
This range varies if u analyse pairs or trips? And if so what is the DC that you are using?
Click to expand...

Excellence

I use SuperFormula.exe to calculate this, so p1=5, p2=30 and DC=99
in my case. Plug in the numbers for your lottery and you have the range.
The result was 25.45 and I rounded it to 26. I use the same range for pairs
and trips. I back tested this and it works. This reduces the number of pairs
and trips I needed for 'Winnalotto'. Once I get BRIGHT, i'll start back to
betting with more confidence.


Springbok

I now have 10 D5's and I ran Report5 which created W5.1 to W5.4
and MD5.1 to MD5.4 reports. I looked at a few reports to try and understand
the trends it's picking. I must say it's a little confusing. What are the
important fields I should be looking at and how do I reconize there's
a trend to pay attention to.

-BP
 
E

Excellence

Member
Hi BP

Are you still after pairs and trips that have at least 4 occurrences or you just select the first 24 pairs/trips with the highest frequency in the selected range?

I also noticed that the columns used in WinnaLotto have changed. After you sort them from z->a you still select the top two?
 
B

black prince

Member
Excellence

Are you still after pairs and trips that have at least 4 occurrences or you just select the first 24 pairs/trips with the highest frequency in the selected range?
Click to expand...

I don't need to filter for ocurences. With the shorter range most trips and pairs will be 0 or 1
occurances.

I also noticed that the columns used in WinnaLotto have changed. After you sort them from z->a you still select the top two?
Click to expand...

I use columns 'MaxVal', 'N+X>=H' and 'Double Hit Perc' now. They proved to
have the most consistant pairs and trips as winners. I take the very top single
pair and/or trip from each column. I no longer take two, because I came up with
too many extra numbers. I also use Springbok's filter 'Fullhouse6' for pairs which
at times has given me the fifth number to get 5 out-of 5. You must back test
these filters and check them against the current drawing. Once you are
confident about of your picks then look at BRIGHT5. I'm putting my own guide
together to make this setup easier. It's a lot of work, but if you hit Jackpot
just once, then it's well worth the work. If you give me your lottery (e.i. 6/49,
5/34,etc.), I'll run Superformula and give you the range for getting pairs and trips.

-BP
 
E

Excellence

Member
Hi BP

Thank you, I am familiar with SuperFormula although I use Excel for this kind of calculations. For your game the range of 26 draws is the minimum range required to have a DC above 99%. To be precise is 99,12645....%. :)

I noticed that sometimes, if you use a low number of draws, WinnaLotto can produce some strange results like a median of 56 when you only load 25 draws.

I will analyze a bit in the next weeks some probability problems. For example: the expected number of occurrences for a pair in 26 draws in a 5/30 game is 8 (I am quite puzzled by the fact that u said most of the pairs will have a frequency of 0 or 1). The probability that the frequency is at least 8 is 58,49%. A probability of 58,49% has an expected value of 7 in 12 experiments (312 draws in our case divided in 10 segments) and 2 in 3 experiments. If we analyze the last 4 segments maybe we could slightly improve our odds of finding those pairs that are due to appear at least 8 times in the next 26 draws. This is not a strategy is an example. :spiny:
 
B

black prince

Member
Excellence

I noticed that sometimes, if you use a low number of draws, WinnaLotto can produce some strange results like a median of 56 when you only load 25 draws.
Click to expand...

I load the full past winning draws in Winnalotto. I load pairs or trips that are
selected from FFG instead of all combinations.

I am quite puzzled by the fact that u said most of the pairs will have a frequency of 0 or 1).
Click to expand...

I have a count of the occurances for each pair and trip in the FFG range.
I shows most have 0, 1, and ocassionally 2 repeats. Remember the range
is 1 to 26 draws and not the entire file.

If we analyze the last 4 segments maybe we could slightly improve our odds of finding those pairs that are due to appear at least 8 times in the next 26 draws.
Click to expand...

I post my method so that others can and should improve it. I'm always open
to new ideas. My only hope is that you and others will share your new
discoveries.

-BP
 
B

black prince

Member
To All

Here's the numbers picked by Winnalotto for 5/13/08 (5/30) ->

1 - 2 - 5 - 6 - 8 - 10 - 11 - 16 - 17 - 18 - 19 - 20 - 22 - 23 - 24 - 30

Here's the winning number drawn today: -> 1 - 8 - 9 - 11 - 18

-BP
 
S

Springbok

Member
Helllo Black Price

So far so good with the files. In a typical D5 file of 400,000+ Bright6 slices the file into four sections or layers. The real draws are superimposed on each of those 4 sections and the filter results are given. In the 632 programme of 10,000 combinations the slicing is done in chunks of 2000. I do not know how Bright5 slices yet. You look at the filters. Each has a + or a - sign. Three + signs in a row will indicate a reversal. Three - signs indicate a reversal. Also look for two or three hits above the median-this indicates a reversal on or below the median. Same with two or three hits below the median indicates a reversal. Then you use the min and max values of the filter. This is how filters are set. Mdied has a tutorial on this and the original Superpower has a tutorial. Also the site has a vast amount of information. It will take a couple of months to master all the aspects. The software is not lightweight.
 
B

black prince

Member
Springbok


Originated from Springbok
So far so good with the files. In a typical D5 file of 400,000+ Bright6 slices the file into four sections or layers. The real draws are superimposed on each of those 4 sections and the filter results are given. In the 632 programme of 10,000 combinations the slicing is done in chunks of 2000. I do not know how Bright5 slices yet. You look at the filters. Each has a + or a - sign. Three + signs in a row will indicate a reversal. Three - signs indicate a reversal. Also look for two or three hits above the median-this indicates a reversal on or below the median. Same with two or three hits below the median indicates a reversal. Then you use the min and max values of the filter. This is how filters are set. Mdied has a tutorial on this and the original Superpower has a tutorial. Also the site has a vast amount of information. It will take a couple of months to master all the aspects. The software is not lightweight.
Click to expand...

Your right when you say 'This software is not lightweight'. I'm going to
devote some reading time to grasp what it's doing. There are so many
filter options that the easiest part (setting up files) is nothing compared to
effectively using it. Those who have mastered it say it's amazing software.
I want to know it as well as they do.

-BP
 
S

Springbok

Member
Helllo Black Price

I think we are hijacking the thread of Moses. Maybe a Bright6,5 thread should be opened. Saliu had his site for posting but it is pretty dead. This board is live in comparison.:)
 
bloubul

bloubul

Member
Hi BP

I'm following your method of "Columns 'MaxVal', 'N+X>=H' and 'Double Hit Perc", no problem with " MaxVal" only one pair / trips, but with "N+X>=H" I got 18plus pairs / trips with the same value. No problem with "Double Hit Perc". Do you use a filter with these columns??????

BlouBul :cool:
 
T

turtle0747

Member
Hello BP from turtle0747

black prince said:
I don't need to filter for ocurences. With the shorter range most trips and pairs will be 0 or 1
occurances.



I use columns 'MaxVal', 'N+X>=H' and 'Double Hit Perc' now. They proved to
have the most consistant pairs and trips as winners. I take the very top single
pair and/or trip from each column. I no longer take two, because I came up with
too many extra numbers. I also use Springbok's filter 'Fullhouse6' for pairs which
at times has given me the fifth number to get 5 out-of 5. You must back test
these filters and check them against the current drawing. Once you are
confident about of your picks then look at BRIGHT5. I'm putting my own guide
together to make this setup easier. It's a lot of work, but if you hit Jackpot
just once, then it's well worth the work. If you give me your lottery (e.i. 6/49,
5/34,etc.), I'll run Superformula and give you the range for getting pairs and trips.

-BP
Click to expand...

Hello BP
Like where you are going with everything. Can u tell me where to get the Fullhouse6 filter? Also, is there a new version of winnalotto and where is it?

thanks
turtle0747
 
T

turtle0747

Member
Hello BP from turtle0747

turtle0747 said:
Hello BP
Like where you are going with everything. Can u tell me where to get the Fullhouse6 filter? Also, is there a new version of winnalotto and where is it?

thanks
turtle0747
Click to expand...

Hello BP

I found the winnalotto download? I will start some testing with my 6/53 lotto with what you are using.

turtle0747
 
B

black prince

Member

Originated from BlouBul
Hi BP

I'm following your method of "Columns 'MaxVal', 'N+X>=H' and 'Double Hit Perc", no problem with " MaxVal" only one pair / trips, but with "N+X>=H" I got 18plus pairs / trips with the same value. No problem with "Double Hit Perc". Do you use a filter with these columns??????

BlouBul
Click to expand...

I take the first pair and trip after sorting (z - a).


Originated from turtle0747
Hello BP
Like where you are going with everything. Can u tell me where to get the Fullhouse6 filter? Also, is there a new version of winnalotto and where is it?

thanks
turtle0747
Click to expand...

Once I have my set of numbers, usually 12 to 15, I create all combinations
from these for 5/30. I'm studing right now BRIGHT5, which will reduce these
combos to a set of draws that potentially have the Jackpot draw. BRIGHT5
is very complex and it will take me time to identify trends that will be used as
filters to achieve this goal. Springbok help me get started and now the
student has to study and get up to speed. :) Fullhouse6 is included in the
new version of 'Winnalotto'.

Finally, Winnalotto's picks for today's TreasureHunt 8/14/08 are:

1 - 2 - 5 - 6 - 8 - 11 - 12 - 13 - 16 - 20 - 24 - 26 - 27 - 30

The winning numbers are: 2 - 10 - 13 - 24 - 26


-BP
 
bloubul

bloubul

Member
Hi Blitz & Co

Thanks to all of you who said a prayer for my sister and Mom inlaw, my sister has confirmed that she can feel a difference.

Thank You Again

BlouBul :cool:
 
You must log in or register to reply here.

Sidebar

Top