Master Lottery Software

T

turtle0747

Member
Hello BP from turtle0747

black prince said:
This screen was left from my testing when I used the entire Winning Draw file.
I have since adjusted this to N3<1 GOTO 2600, because my past history
range is only 130. I hope you understand.

-BP
Click to expand...

Hello BP

Have some questions. Will start from the beginning with QWBASIC.

1. When you run your Basic programs for Pairs and Trips, you do 60 records for Pairs and 130 for Trips. What does your history file look like? Is your first record in the file the last draw?

2. How many records are in your history file? Do you have 2 history files? one with 60 for Pairs and one with 130 for Trips?

3. Now on to Winnalotto. How big is your History file that you load into Winnalotto? Do you use a large file? How many records are in you History file for Winnalotto?

thanks
turtle0747
 
T

turtle0747

Member
Hello BlouBul from turtle0747

bloubul said:
Hi turtle0747

Could you figure out the number of draws to use on a 6/49 based on BP method. I tried, but after 6hours non stop, I'm non the wiser, for me it only worked on the next draw, there after zilts. I used 85(pairs), 180(trips) than 75(pairs),105(trips), skiped the first 15 draws.

BlouBul :cool:
Click to expand...

Hello BlouBul

I don't know if I can help you. I play the Florida lotto 6/53. I am also just learning some things from BP and have ask him some questions above.

turtle0747
 
S

Springbok

Member
Hi BP

i have been testing the optimum skips settings using Saliu's software with the 6/49 game.
1) last 2 skips(including the current one sum up to 4. Strike rate from 110% to 125%
2) last 2 skips above 2. Strike rate from 121% to 125%.
When you are testing pairs look for these settings. Will test with triples later.

These two systems are the best of the lot under testing with various skip settings.

This was done on the UK lottery using a 48 draw history. I was using my alpha and foxtrot files for the testing.
 
S

Springbok

Member
Hello BP

These filters should bring out the last 2 skips above 2 for the 6/49 game.

#20 > #1
and
#21 > #1
and
#22 <> #1
and
#23 <> #1
and
#24 <> #1
 
B

black prince

Member
To All

I've been working to make this process easier for all by using Winnalotto's Load Draw screen.
Set skip 0 draws and load limit to 60. In other words set the range for example 1 to 60
for PAIRS. This is much easier than writting a GWBASIC program. This makes back testing
much more easier. For now, I am only using "Median", "N+x>=H" and "Rebal" as test
columns to keep the resulting numbers at 12 to 15 for (5/30). Winnalotto generates all
the combinations of PAIRS and/or TRIPS via tab buttons on Drawning Analysis screen. So,
you don't have to write any more programs, especially GWBASIC. Now lets get down to
selecting. I write down the first two pairs or trips from each column sorted (z - a).
When done, I tally which numbers that has appeared. Next, I run filters contributed
by Springbok and Struxo, in the event they produce the number needed to make
5 out of 5 Jackpot. I played around with the forcaste in Drawing Analysis, but when
it gets history to forecaste the future drawing, it crashes and gives me a "Write
Violation error...." If I can get this to work, most of you will have all the tools
needed in WinnaLotto to start winning money.

Springbok.

Here are the numbers I have gotten for the UK Thunderball Lottery for next drawing:

1 - 2 - 4 - 8 - 9 - 12 - 14 - 16 - 17 - 18 - 19 - 20 - 21 - 22 - 24 - 26 - 27 - 30 - 33

Seventeen (17) numbers. 1 and 16 were forcasted by your filter.

This is my first forcaste for UK Thunderball, so please go easy on me :)

-BP
 
bloubul

bloubul

Member
Hi BP

"I played around with the forcaste in Drawing Analysis, but when
it gets history to forecaste the future drawing, it crashes and gives me a "Write Violation error...." If I can get this to work, most of you will have all the tools needed in WinnaLotto to start winning money."

Please tell me more, as mine is working 200%, I want to be reading on May 3 for 20mil draw. I will use a Robert Serotic wheel, 24 numbers, 1st prize guaranteed.

BlouBul :cool:
 
B

black prince

Member
Hi BlouBul


Originated by BlouBul
Please tell me more, as mine is working 200%, I want to be reading on May 3 for 20mil draw. I will use a Robert Serotic wheel, 24 numbers, 1st prize guaranteed.

BlouBul
Click to expand...

This would be a quick way to get started without back testing.
You need to get the past winning history file and convert to CSV format in
Excel. Load this in "WinnaLotto" and use columns "Median", "N+x>=H", and
"Rebalance". in Drawing Analysis. Click on the "Pairs" button and click in the
first cell of "Median". Now right-click your mouse and select sort (z - a). This will
sort this column from the greatest to smallest counts. Pick the first two
top sets. Write this down. Do the same for "N+x>=H" and "Rebalance".
Next Click on the "Trips" button and use the same columns. Write down the
trips in the first two cells. Next write the numbers of you lottory down
with space so you can circle the number when you find it from the pairs and trips.

Example:
1 - 2 - 3 - 4 - 5 - 6 ... and so on.

As you find a number from the pairs or trips circle this in your list.
If you encounter duplicate numbers and already have it circled, just ignor,
but cross it out in the pairs and/or trips groups. Now you have a
set of circled numbers that you can wheel using Robert Serotic method.

Good Luck

-BP
 
Patrick123

Patrick123

Member
Back to the Future!!!

Hi everybody,

It is absolutely fantastic to be back again after being in a place with the technological equivalent of paraffin driven computers :lphant:

Now that the work is complete, I have a few days to absorb all that has been happening and start working on various bug fixes in Winnalotto.

I don't want to hijack Moses' thread so I wonder whether we should start a new thread or simply continue with the 'Sangoma' thread, at the same time Moses' info has been interesting and anything we can use to create the 'Ultimate' lotto tool even if it means multiple methods merging, is worth it.

I must admit, I've been lazy in developing the WinnaLotto further these last few months. to the extent that even after selecting the numbers from the various filters, I simply wheel them, I use Winnalotto V1.0 for this as it attempts to fit the numbers into the wheel along statistically similar orders (e.g. totals, odd & evens, & previous occurrences).

Where this wheeling system falls short, is that I cannot select the option of taking 1 or 2 opening batsmen, 1 or 2 Uboats, 1 Historically High, and a Fence-Sitter.

Extra musings
Similar to how Springbok has allocated certain names to certain behaviours of the balls, I've tried to relate the lotto to a real-world simulation. The closest I've managed to come is to imagine a playground with a slide, everyone queues up to have a go, but you get the rude people who will consistently push in(opening batsmen), the timid children who have to have to go but would offer their place to someone else first(Historical High/Cold), the friends(2 or 3 balls that follow each other closely), etc.

I want to expand on this idea further using WinnaLotto, then using Moses' filter concepts, produce x number combinations that will have a higher than average probability of striking.

Regards
Patrick
 
bloubul

bloubul

Member
Hi Patrick123

WAAR WAS JY AL DIE TYD. ONS IS VREK VAN BEKOMMERDNES. ONS KORT BAIE SO VER DIT WINNALOTTO AAN GAAN.

BlouBul :cool:
 
Patrick123

Patrick123

Member
Hi Bloubul,

I was busy with a project down in Lesotho. I should be back in the land of the living for a while.

So much to catch up on.... so little time...

Regards
Patrick
 
blitzed

blitzed

Member
Welcome back Patrick!

Great to seeya makin rounds again:agree:

As for WinnaLotto development, the fact that you stepped away for a while could be the best thing to happen.

You can hop back to your pet project, with fresh enthusiasm & heaps of new ideas:)

cheers!
blitzed:thumb:
 
B

black prince

Member
Welcome Back Patrick123

Hi Patrick,

I've been having great success with "WinnaLotto" and usually get 4 out-of 5,
or 5 out-of 5 numbers in future draws for (5/30). "WinnaLotto" numbers
usually gives me between 12 to 15 numbers. My frustration is getting the
combinations draws for winning numbers. Any solutions you have will be
very welcomed. I'm looking at Robert Serotic's Wheeling Systems to get
some ideas.

BTW, I've been back testing using "WinnaLotto" to determine the effectiveness
of column filters. Is it possible to enhance "WinnaLotto" to make this easier.

Thanks


-BP
 
T

turtle0747

Member
Hello BP from turtle0747

black prince said:
This would be a quick way to get started without back testing.
You need to get the past winning history file and convert to CSV format in
Excel. Load this in "WinnaLotto" and use columns "Median", "N+x>=H", and
"Rebalance". in Drawing Analysis. Click on the "Pairs" button and click in the
first cell of "Median". Now right-click your mouse and select sort (z - a). This will
sort this column from the greatest to smallest counts. Pick the first two
top sets. Write this down. Do the same for "N+x>=H" and "Rebalance".
Next Click on the "Trips" button and use the same columns. Write down the
trips in the first two cells. Next write the numbers of you lottory down
with space so you can circle the number when you find it from the pairs and trips.

Example:
1 - 2 - 3 - 4 - 5 - 6 ... and so on.

As you find a number from the pairs or trips circle this in your list.
If you encounter duplicate numbers and already have it circled, just ignor,
but cross it out in the pairs and/or trips groups. Now you have a
set of circled numbers that you can wheel using Robert Serotic method.

Good Luck

-BP
Click to expand...

Hello BP

With the instructions above are you now using a full History file?

thanks
turtle0747
 
Patrick123

Patrick123

Member
Hi Blitzed, Hi Black Prince,

Thanks for the welcome. I've got heaps of ideas, now just to implement them.:agree:

BP, the way I evaluate a column filter is to first load the drawings file.

I then go to the Drawing Analysis screen and adjust the 'For the past' spinner to 5 or 10 drawings, then click the 'Get History' button.
Once the historical info has been loaded, I then load a column filter, after it has finished re-calculating, I click the 'Filter evaluation' button.
This not only tells me how that column filter has performed for the next draw but for the next four consecutive draws, as I believe some of the numbers are actually predicted a draw or 2 before they actually fall due.

Using this with the Alpha2/3 type filters on the right, you can draw up an extremely accurate evaluation of the performance of the combined filters.

Regards
Patrick
 
S

Springbok

Member
Gooie Aand Patrick

Welcome back,long time no see. Wondered what happened to you. We can carry on with this thread or start a new one. The original thread is too vast and huge with too many pages. Glad to see you are brimming with ideas, so am I. I have been testing the efficiency of the original filters over the weekend, but more of that later.
 
S

Springbok

Member
Bp and everybody

Try this filter. It can be seriously effective in the next 2 or 3 draws. I call it Fullhouse, named after the bloke who started all this chasing after two numbers. This one is Fullhouse6. I have a range going from 2 to 6+. I have tested it in the 49s 7/49 and it can be devastating. with number pairs. It has given me 20 wins in a row, but like all filters it can occasionaly fail.


#20 > #1
and
#21 > #1
and
#22 > #1
and
#23 > #1
and
#24 > #1
and
#51 > #1
 
B

black prince

Member
Patrick123


Originated from Patrick123
BP, the way I evaluate a column filter is to first load the drawings file.

I then go to the Drawing Analysis screen and adjust the 'For the past' spinner to 5 or 10 drawings, then click the 'Get History' button.
Once the historical info has been loaded, I then load a column filter, after it has finished re-calculating, I click the 'Filter evaluation' button.
This not only tells me how that column filter has performed for the next draw but for the next four consecutive draws, as I believe some of the numbers are actually predicted a draw or 2 before they actually fall due.

Using this with the Alpha2/3 type filters on the right, you can draw up an extremely accurate evaluation of the
Click to expand...



I tested each column filter (19 of them) and I get the same % success for all. Any clues what's happening.

-BP
 
B

black prince

Member
turtle0747


Originated from Turtle0747
Hello BP

With the instructions above are you now using a full History file?

thanks
turtle074
Click to expand...

Yes!!, If I use my GWBASIC program to load pairs and trips in Winnalotto, the
picks are better, but that takes time.

-BP
 
S

struxo

Member
hi

Hello Patrick, welcome back!

I have some ideas about digit endings. Here it is:
we deal with numbers between 0-9. So winning line may be 2 5 0 1 3 4.
I make 2 groups with those numbers.
group 1 : 0 1 2 3 4
group 2 : 5 6 7 8 9

then instead 2 5 0 1 3 4 we have 1 2 1 1 1 1.
Now, if we look on history draws there's only ones and twos.
We can use Saliu's FFG for next step:
Check for the first position , if the last draws number was 1 then there is 50% chance that next draw is gonna be 2. If last two draws was 1 then there is 75% chance for 2 etc.
Now we deal with 5 endings for each position instead 10.
i hope that my math is correct and my english is good. :)
 
You must log in or register to reply here.

Sidebar

Top