Beaker
Member
Boy I'm
If you are running NT DO NOT download the latest patch for IE6
You will f&$k your machine royally
Linux here I come
Appears I'm not the only one
I applied the latest hotfixes today and had a problem with
823803 (confirmed by removing). The point-to-point
protocol module would not load. Details -
7/27/03 11:54:12 AM Service Control Manager Error
None 7023 N/A KS02NT4SRV The Remote
Access Connection Manager service terminated with the
following error:
The specified module could not be found.
7/27/03 11:54:12 AM RemoteAccess Error None
20067 N/A KS02NT4SRV Remote Access
Connection Manager failed to start because the Point to
Point Protocol failed to initialize.
7/27/03 11:54:12 AM RemoteAccess Error None
20074 N/A KS02NT4SRV Point to Point
Protocol engine was unable to load the module.
7/27/03 11:50:23 AM Service Control Manager Error
None 7001 N/A KS02NT4SRV The Remote
Access Autodial Manager service depends on the Remote
Access Connection Manager service which failed to start
because of the following error:
The specified module could not be found.
7/27/03 11:50:23 AM Service Control Manager Error
None 7023 N/A KS02NT4SRV The Remote
Access Connection Manager service terminated with the
following error:
The specified module could not be found.
7/27/03 11:50:23 AM RemoteAccess Error None
20067 N/A KS02NT4SRV Remote Access
Connection Manager failed to start because the Point to
Point Protocol failed to initialize.
7/27/03 11:50:23 AM RemoteAccess Error None
20074 N/A KS02NT4SRV Point to Point
Protocol engine was unable to load the module.
Anyone else seen this behavior?
Note: only shows if RAS enabled.
If you are running NT DO NOT download the latest patch for IE6
You will f&$k your machine royally
Linux here I come
Appears I'm not the only one
I applied the latest hotfixes today and had a problem with
823803 (confirmed by removing). The point-to-point
protocol module would not load. Details -
7/27/03 11:54:12 AM Service Control Manager Error
None 7023 N/A KS02NT4SRV The Remote
Access Connection Manager service terminated with the
following error:
The specified module could not be found.
7/27/03 11:54:12 AM RemoteAccess Error None
20067 N/A KS02NT4SRV Remote Access
Connection Manager failed to start because the Point to
Point Protocol failed to initialize.
7/27/03 11:54:12 AM RemoteAccess Error None
20074 N/A KS02NT4SRV Point to Point
Protocol engine was unable to load the module.
7/27/03 11:50:23 AM Service Control Manager Error
None 7001 N/A KS02NT4SRV The Remote
Access Autodial Manager service depends on the Remote
Access Connection Manager service which failed to start
because of the following error:
The specified module could not be found.
7/27/03 11:50:23 AM Service Control Manager Error
None 7023 N/A KS02NT4SRV The Remote
Access Connection Manager service terminated with the
following error:
The specified module could not be found.
7/27/03 11:50:23 AM RemoteAccess Error None
20067 N/A KS02NT4SRV Remote Access
Connection Manager failed to start because the Point to
Point Protocol failed to initialize.
7/27/03 11:50:23 AM RemoteAccess Error None
20074 N/A KS02NT4SRV Point to Point
Protocol engine was unable to load the module.
Anyone else seen this behavior?
Note: only shows if RAS enabled.
Last edited: